G632 Series Back Mount Redline Sight Gage - 270° Viewing With Front Dial Thermometer
View Larger
Additional Product Information
The G632 Series back mount closed circuit sight gages provide 270° of viewing the fluid level clearly delineated by a redline on white background integral to the sight glass all secured within an aluminum body (HIGH-LOW markings). A wetted front facing dial thermometer provides an analog display of the fluid temperature. The oversized gage body allows a deeper recess of the sight glass and dial thermometer for maximum protection of these components against damage.
Standard Features:
- Centerline length of 5 inches
- Back mount
- 1.25 inch SQ body machined from aluminum bar stock
- 270° of viewing the fluid level (.88 inch front and .50 inch side width windows)
- Viewing enhanced by redline on white background integral to sight glass
- 1.38 inch diameter dual scale dial thermometer, 50° to 300°F and 10° to 150°C
- Aluminum tube shields thermometer probe extending into reservoir
- HIGH-LOW markings on front face of aluminum body
- 1/2-20UNF mounting studs accommodate reservoir wall thicknesses up to .75 inches
- Suitable for use with most hydraulic and machine lubricating oils
Access to inside of reservoir is required to mount this style sight gage.
Standard Materials:
- Aluminum construction
- Buna N seals
- Borosilicate glass sight
- Zinc plated, steel hex nuts
Caution:
- Not recommended for use with water, steam, acidic fluids, caustic fluids and volatile fluids.
- Reservoir must be drained to remove dial thermometer or loss of fluid will occur
Pressure Rating
- 125 psi (862 kPa) maximum working pressure at 150°F (65°C)
Product Options
Common Modifications Available
- Seal Material: Butyl, Fluorocarbon (Viton®), Ethylene Propylene (EPDM) or Silicone
Minimum quantities may apply.
Related Products
LDI offers several different gage series that provide expanded viewing of the fluid level along with temperature monitoring.
When temperature monitoring is not required within the sight gage, refer to these popular products for viewing and monitoring fluid media.
Your fluid storage system is not complete until you define the reservoir. Off-the-shelf or customized to your specifications, consider LDI your source for: