GTW100 Series Vented Oil Gage - Male Elbow (3/8 and 1/2 pipe) with Dial Thermometer

The GTW100 Series vented brass oil gage has a male elbow base with integral dial thermometer. The viewing window has 360° adjustment during installation for optimal orientation to view fluid during installation. The dry dial thermometer is self-contained within a thermowell for monitoring fluid temperature. This construction allows the thermometer face to be rotated after gage installation for optimal viewing position. The sealing gaskets are contained on both their ID and OD to facilitate trouble-free assembly after on-site repositioning of the viewing window.

Standard Features:

• .88 inch SQ base
• Machined from brass bar stock
• Male tapered pipe thread base connection (3/8, or 1/2 inch NPTF)
• .39 inch wide viewing window, length varies from 1.83 to 5.33 inches depending on gage selected
• 360° adjustment of viewing window
• 1.38" diameter dual scale dial thermometer, 50° to 300°F and 10° to 150°C
• Dial thermometer may be rotated or removed from gage without loss of fluid
• Suitable for use with most machine lubricating oils

Standard Materials:

• Brass construction
• Buna N seals
• Borosilicate glass sight

Note:

• When installing oil gage in a confined space, disassemble the base subassembly from the rest of the oil gage. The base subassembly consists of the pipe adapter, base and thermometer. Install the base subassembly separately to the reservoir. Once base subassembly is in position and secure, reassemble the loose oil gage components to the base.