Vari-Pak Series Reservoirs

A Vari-Pak Series reservoir is a variation of the the vertical series reservoirs. This series reservoir has a flat bottom that extends past the reservoir body to serve as the mounting surface of the reservoir. Custom, bolt-on cover configurations are available for mounting the most common system components such as filler breathers and motor adapters.

Standard Features:

• Reservoir capacities ranging from 2 to 25 gallons
• Channel gasket installed on reservoirs with capacity <= 5 gallons
• Flat cover plate gasket utilized on reservoirs with capacities > 5 gallons
• Cover plates are sold separately, refer to Cover Series 4 for available options
• Reservoir capacities > 5 gallons have an added 6 inch access cover on side surface
• Reservoir bottom is flat
• (1) 1/2 inch NPT drain for reservoir capacities <= 5 gallons (plugged)
• (1) 3/4 inch NPT drain for reservoir capacities > 5 gallons (plugged)
• 5 inch GT623 Series sight gage with card thermometer, dual scale 0°F to 220°F and -20°C to 110°C, location varies by reservoir selected
• Exterior painted with a LDI gray primer
• Interior coated with rust preventative oil

Sight gage, hardware to mount cover and cover flat gasket (when applicable) provided loose with reservoir

Standard Materials:

• Carbon steel construction
• Buna N sight gage seals and access cover gasket
• Neoprene flat cover plate gasket
• Molded, transparent nylon sight gage with black powder coated steel guard

Caution:

• Reservoirs are not designed for internal positive or negative pressure applications. For these applications, consult the factory.